Statewide
What can water-quality records tell you?
Use the record that matches your water: your public system’s results, a test of your own well, or a dated lake bloom notice.
Research snapshot ·
Ready to paste into a message or email.
Copy this address: https://idahowaterstatus.com/explore/water-quality
TL;DR
The short answer
- For tap water from a city or other public system, look up your own system by name and read its dated test results. A nearby system can have different results.
- Private wells fall outside the federal Safe Drinking Water Act, so owners must make sure their water is safe. The state advises testing for nitrate and bacteria at least once a year. Test for nitrate more often if a pregnant woman or an infant will be using the water.
- Harmful algae bloom notices go from Watch to Alert to Advisory, and all three say not to drink the water. The state cannot watch every lake and river all the time, so check current notices and stay out when in doubt.
What this means for you
Find your water system’s name on your bill and search for it in the state’s Drinking Water Watch tool. If you have a private well, test it for nitrate and bacteria at least once a year. Test for nitrate more often if a pregnant woman or an infant will be using the water. If a result is high, call your public health district or Idaho Health and Welfare at 1-800-445-8647 for next steps. Do not boil water with high nitrate, arsenic or uranium. Before a lake trip, check the current bloom notices, and when in doubt, stay out and keep pets out.
Terms used in this guide
- Concentration
- How much of a substance is in a set amount of water, such as milligrams per liter (mg/L).
- Collection date
- The day a sample was taken or a bloom was seen. Notices and reports often come later.
- Cyanobacteria
- Bacteria found naturally in Idaho waters. In warm weather they can multiply into blooms, and some release toxins.
A water-quality record tells you what someone tested, where, when and what they found. It helps only when it matches the water you use. A public water system, a private well and a lake each have their own records and testing rules. Bloom warnings can last past summer. On November 6, 2026, the Idaho Department of Environmental Quality (DEQ) still listed 14 waterbodies under a Health Advisory, the top bloom warning.
How do I find the records for my public water system?
DEQ says Idaho has about 2,000 public drinking-water systems serving about 1.3 million people. Its Drinking Water Bureau works with Idaho’s seven public health districts to protect water sources, monitor for contaminants, inspect systems and review engineering. DEQ’s Drinking Water Watch lets you search by system number or name, county, system type and main water source. Start there, because a city or neighborhood name may not match the system that serves you.
Find the provider’s name on your water bill and use it to pick the right record. Keep each result with its sample date, contaminant and sampling point. A yearly water-quality report covers a past period, and its rows can come from different years. Kuna’s 2025 report, for example, says the city’s water met federal and state requirements and covers sampling from January through December 2025. Its lead and copper samples, though, were collected June 28, 2023.
How do I check the water from my own well?
Private wells are not regulated under the federal Safe Drinking Water Act, and DEQ says owners are responsible for making sure their water is safe. Nitrate, bacteria and arsenic are three of the most common groundwater contaminants in Idaho. DEQ recommends testing a private well for nitrate and bacteria at least once a year. It also says to test for nitrate more often if a pregnant woman or an infant will be using the water. The Idaho Department of Health and Welfare (DHW) says high nitrate lowers the blood’s ability to carry oxygen. That can be especially dangerous for infants and pregnant people.
DHW also advises testing every 3 to 5 years for other contaminants, including metals and chemicals. A sample from your own well tells you more than a neighbor’s well or a nearby city system. You can collect it yourself and have an Idaho-certified laboratory test it. Your DEQ regional office or public health district can tell you which contaminants are a concern in your area. They can also explain how to get containers, collect the sample and how soon to deliver it.
If a test finds a contaminant, DEQ says to go over the results and health risks with your public health district. DHW’s Environmental Health Program, at 1-800-445-8647, can also help you understand results and choose a fix. The fix depends on the contaminant. DEQ warns not to boil water with high nitrate, arsenic or uranium, because boiling concentrates them.
DHW advertises free well testing through its Idaho Health Tools site. When we checked on November 6, 2026, the kit page was marked sold out. DHW also says kits may take up to two months to process. The free panel covers nitrate, fluoride, arsenic, lead, uranium and eight more, such as manganese and copper. It leaves out bacteria and per- and polyfluoroalkyl substances (PFAS), man-made chemicals that mostly do not break down. For faster or broader testing, use DHW’s list of certified labs and its sampling steps, then confirm the tests and timing with the lab.
How do I read a test result?
Check the units before you compare a result with a limit. DHW lists the drinking-water standard for arsenic as 10 micrograms per liter (µg/L). The U.S. Environmental Protection Agency (EPA) writes the same limit as 0.010 milligrams per liter (mg/L). A microgram is one-thousandth of a milligram, so the two figures match. In DHW’s table, nitrate’s standard is 10 mg/L. Both print as 10, but the nitrate limit is 1,000 times larger. Public systems must meet these standards, and DHW tells well owners to compare their results with them, converting units if needed.
One result is not the same as a compliance decision. For lead and copper, EPA’s rule looks at a set of tap samples. If more than 10% exceed the action level, the system must take more steps. DHW’s private-well map shows the latest results for up to nine chemicals and the year each well was sampled. It also notes that newer results may exist. A blank on the map means only that no result is shown there, so test your own well if you need to know. For help reading or converting a result, call the lab that ran the test or the Idaho Environmental Health Hotline at 1-800-445-8647.
What do harmful algae bloom notices mean for swimmers and pets?
Under Idaho’s cyanobacteria response plan, DEQ responds to bloom reports, samples waterbodies and analyzes the data. DHW then decides whether a public health notice is needed. Health Watches and Health Alerts give early warning while toxin test results are pending. DHW announces Health Advisories where a toxic bloom has been confirmed. Current notices appear on DHW’s Recreational Water Health Advisories map and in DEQ’s CyanoHAB Risk Data Table.
The advice gets stricter at each level. A Health Watch means signs of a bloom from field observations, photos or satellite data, and toxins may not have been measured. A Health Alert means a high risk to pets and livestock and possible illness in people. It is based on a field test, a lab test or reported illness in people or animals. A Health Advisory means toxins or toxin-making cyanobacteria are above health thresholds, usually based on lab tests or verified illness. All three say not to drink the water. Alerts and Advisories also say to keep children and animals out, and an Advisory adds no swimming or wading.
The table below shows three listings from DEQ’s risk table on November 6, 2026. For Star Ponds and Mann Lake, the date is when the observations or samples were collected, not a new reading. When we first checked that day, Lake Lowell showed a Health Alert from an October 2 field test that confirmed toxins. By our second check, DEQ listed a Watch there dated November 1, because the Alert had expired after 30 days.
DEQ says it cannot monitor every waterbody all the time, and blooms can form quickly in hot weather. When in doubt, stay out and keep pets out. If you, your children or your pets touch water that may have a bloom, rinse right away with soap and clean water. Boiling does not remove the toxins and concentrates them. Public water systems are not required to test for cyanotoxins, though some may test on their own. If your tap water comes from a lake or river, ask your provider whether it tests.
Star Ponds
- Notice
- Watch
- Date and basis
- October 19: field observations
Lake Lowell
- Notice
- Watch
- Date and basis
- November 1: Health Alert expired after 30 days
Mann Lake
- Notice
- Health Advisory
- Date and basis
- October 8: lab results
Sources: [3]
What do statewide river and lake reports tell me?
Every two years, DEQ reports on Idaho’s surface waters, as the federal Clean Water Act requires. Its 2024 Integrated Report, issued in final form in March 2025, uses data collected from January 1, 2018, through December 31, 2022. So a “2024” report, published in 2025, rests on data that ends in 2022. DEQ divides waters into assessment units, such as a group of similar stream segments, and places each one in at least one of five categories.
Categories 1 and 2 mean a water fully supports its uses. Category 3 means it has not been assessed, and in this report 25,728 of Idaho’s 92,056 stream miles were in Category 3. One assessment unit can be impaired by more than one cause and can sit in both Category 4 and Category 5. That is why DEQ’s category percentages add up to more than 100%. Use the report for long-term patterns across many waters. For a swim this weekend, check the bloom notices; for your tap, check your system’s records or test your well.
Sources: [5]
One report, four different dates
A report you read today can rest on measurements taken years earlier.
- January 2018–December 2022Observations used in the assessment.
- 2024The report edition, not the sample date.
- March 2025Final publication of the assessment.
- November 6, 2026Our review date; the older observations remain older observations.
The 2018–2022 span covers the new data added for this edition. Some waters stay on the impaired list because an earlier report put them there, so those findings can rest on older data. For conditions today, look for a recent dated sample or notice.
Evidence: DEQ Integrated Report
Follow the sources
Read our source summaries, or open the original documents to check the details.
-
Idaho Department of Environmental Quality (DEQ): Drinking Water Watch
Search page checked November 6, 2026: find a public system by number, name, county, type or water source
Original document: Idaho Department of Environmental Quality (DEQ): Drinking Water Watch (opens in a new tab) -
Idaho DEQ: wells and drinking water
Wells page checked November 6, 2026: number of public systems, owner duties, when to test, labs, next steps and the boiling warning
Original document: Idaho DEQ: wells and drinking water (opens in a new tab) -
Idaho DEQ: harmful algae blooms
Warning levels, agency roles and the risk table, checked twice on November 6, 2026
Original document: Idaho DEQ: harmful algae blooms (opens in a new tab) -
Idaho DEQ: public drinking-water program
Main page checked November 6, 2026: what the Drinking Water Bureau does and who it works with
Original document: Idaho DEQ: public drinking-water program (opens in a new tab) -
Idaho DEQ: 2024 Integrated Report (final, March 2025)
PDF pages 1, 9, 11 and 16: release date, stream miles not yet rated, how waters are grouped and sorted, and the 2018–2022 data years
Original document: Idaho DEQ: 2024 Integrated Report (final, March 2025) (opens in a new tab) -
Idaho Health and Welfare: drinking water and private wells
Page and kit link checked November 6, 2026: when to test, help line, limits, units, free kit (marked sold out) and lab list
Original document: Idaho Health and Welfare: drinking water and private wells (opens in a new tab) -
U.S. Environmental Protection Agency (EPA): national drinking water rules
Standards table and notes: arsenic limit of 0.010 mg/L and the lead and copper sampling rule
Original document: U.S. Environmental Protection Agency (EPA): national drinking water rules (opens in a new tab) -
City of Kuna: 2025 water quality report
Page 1: January to December 2025 report period; page 2: results tables, with lead and copper samples from June 28, 2023
Original document: City of Kuna: 2025 water quality report (opens in a new tab)
Cite or share this guide
Idaho Water. “What can water-quality records tell you?.” Research snapshot: 2026-11-06. Cite the original source for a specific figure.