Skip to content

Statewide

How do I read my water-quality report?

Check the water system and year first. Then read each row across: the amount found, its unit, the limit and the test date.

Research snapshot ·

Ready to paste into a message or email.

Copy this address: https://idahowaterstatus.com/explore/water-quality-report

Open the one-page brief

TL;DR

The short answer

  • Finding a substance in your water is not a violation by itself. Compare its amount and unit with the limit and test date.
  • Idaho Falls’ 2025 report lists zero violations. Its highest nitrate result was 2.47 parts per million (ppm), below the 10 ppm limit.
  • Twin Falls’ 2025 report marks an arsenic violation. Its highest result, 12.1 on January 28, 2025, was above the limit of 10. Customers can ask the city for newer results.

What this means for you

Find the report for the water system that serves your home. Check its year and each row’s test date, then read one row at a time, all the way across. Look for a Y or “Yes” in the violation column, or a result above its limit. If you find one, call the contact listed in the report and ask what happened next. If you care for a baby under six months, read the nitrate note. If you are pregnant or have young children, read the lead note too.

A useful next step

Open Idaho Falls’ 2025 report (PDF)

Terms used in this guide
Consumer Confidence Report (CCR)
A water provider’s yearly report on where its water comes from and what testing found.
Maximum contaminant level (MCL)
The highest level of a contaminant allowed in drinking water, set as close to the goal as treatment technology allows.
Maximum contaminant level goal (MCLG)
The level below which there is no known risk to health. It is a goal, not an enforceable limit.
Action level
The level of a contaminant that, if exceeded, requires the water system to treat the water or take other steps. In these reports it appears on the lead and copper rows.
90th percentile
The value that 9 of every 10 samples were at or below. Some samples can still be higher.

A water-quality report is a dated record of testing, not a pass-or-fail grade. Idaho Falls’ 2025 report makes a clear first example. Meridian’s 2025 report shows how lead results are summarized. In November 2025, 2 of its 117 lead samples were above the action level, while the summary result stayed below it. Twin Falls’ 2025 report shows what a marked violation looks like.

Which water system and year does the report cover?

Idaho Falls’ report names public water system ID7100039 and covers January 1 through December 31, 2025. Its statement of zero violations applies to that period. Yet 7 of its 13 table rows, including arsenic, show a test year of 2024. The year on the cover is not always the year a sample was taken.

Meridian’s report explains how older samples end up in a new report. The State of Idaho requires the city to test for some contaminants less than once a year. The city says levels of those contaminants are generally stable, or the system is not considered vulnerable to them. So some of its data may be more than a year old. If a number looks the same in two years’ reports, check the date. It may be the same older sample.

Sources: [1] [2]

How do I read one row of the table?

The table below follows three rows from Idaho Falls’ report. Keep each number with its unit. Parts per million (ppm) and parts per billion (ppb) are different scales, so a bare number cannot be compared across them. The report offers a way to picture them. One part per million is like one penny in $10,000. One part per billion is like one minute in 2,000 years.

The arsenic row shows why a goal and a limit differ. The goal is 0 and the limit is 10 ppb. The report defines the goal as the level below which there is no known risk to health. Idaho Falls’ highest arsenic result was 2 ppb, from a 2024 sample, with no violation marked.

A result above a zero goal is not, by itself, a violation. The report adds a health note anyway. It says the city’s water meets the U.S. Environmental Protection Agency (EPA) arsenic standard but does contain low levels of arsenic. EPA’s standard, the note says, balances arsenic’s possible health effects against the cost of removing it. EPA continues to study the health effects of low levels. The note adds that arsenic is known to cause cancer in humans at high levels and is linked to skin damage and circulatory problems.

The nitrate row has a health note on page 2. The report says nitrate above 10 ppm is a health risk for babies younger than six months, and high levels can cause blue baby syndrome. Levels can rise quickly for short periods after rain or farm activity. If you care for an infant, the report advises asking your health care provider.

Nitrate

Lowest to highest result, test year
1.53–2.47 ppm; 2025
Limit printed in the report
Limit 10 ppm; no violation
What it tells you
The highest result is below the limit.

Arsenic

Lowest to highest result, test year
0–2 ppb; 2024
Limit printed in the report
Limit 10 ppb; goal 0; no violation
What it tells you
An older 2024 sample. The highest result is above the goal but below the limit.

Chlorine

Lowest to highest result, test year
0.2–0.3 ppm; 2025
Limit printed in the report
Disinfectant limit 4 ppm; no violation
What it tells you
The city adds chlorine on purpose to control germs.

Sources: [1]

What kind of number am I looking at?

Tables do not all use the same kind of number. A range, a highest result, an average and a percentile each answer a different question. Meridian’s chlorine row, for example, gives an average level next to a highest level. Read the column heading before you compare a result with its limit.

Meridian’s lead results show why this matters. The city collected 117 lead samples in November 2025. Its 90th-percentile result was 4 ppb, below the 15 ppb action level. The table marks lead “No” in its column for going over the limit. Two of the 117 samples were above 15 ppb. Both facts are true at once. A summary number below the action level does not mean every sample was below it.

Reports also label the 15 ppb lead level in different ways. Idaho Falls prints it in its limit column, next to a highest lead result of 3 ppb in 2025. Meridian calls it an action level. If that level is exceeded, Meridian says, it triggers treatment or other requirements the water system must follow.

Sources: [1] [2]

What if the report marks a violation?

Twin Falls’ table marks arsenic “Y” for violation. Its highest result was 12.1, detected January 28, 2025, against a limit of 10. The report’s violation notice says some people who drink water with arsenic above the limit over many years could have skin damage or circulatory problems. They may also have a higher risk of cancer.

The same page has two inconsistencies. The arsenic row is labeled ppm, but its limit of 10 matches the arsenic limit Idaho Falls prints in ppb. The opening paragraph refers to 2024, while the table covers 2025. Either way, 12.1 is above the printed limit of 10. Ask the city to clarify. Do not change the unit yourself or set the violation aside.

Page 2 reports two more violations. From January to June 2025, the city failed to properly report required pH and temperature readings with its sample data to its regulator. The report calls these monitoring violations. They concern missing reports, not a high test result. That section does not mention arsenic, which is one more thing to ask about.

Ask specific questions. Which sample and period does the violation cover? What notice or fix followed? Where are the latest results? Is arsenic still above the limit today? The report lists a phone number and email for the city’s drinking water superintendent.

Sources: [1] [3]

How do I follow up on my own water?

Save the report and write down the system ID, the report year and any row you want to ask about. When you call, name the substance, unit, test date and column. That helps the operator find the same result. Idaho Falls and Meridian both list a phone number and email for questions.

To look up your public water system, search Drinking Water Watch from the Idaho Department of Environmental Quality. You can search by system number, name or county. Make sure the report you read is for the system that serves your home, not a nearby one. If you have a private well, no city’s report covers it.

Lead is also a question about your own pipes. Idaho Falls’ report says lead comes mainly from service lines and home plumbing. High levels can cause serious health problems, especially for pregnant women and young children. The city’s lead service line inventory found no lead service lines. To lower your exposure, the report suggests running your tap for up to 2 minutes before use. If you are concerned, it suggests testing your water.

Sources: [1] [2] [4]

Follow the sources

Read our source summaries, or open the original documents to check the details.

  1. Idaho Falls: 2025 drinking water report

    Page 1: results table, units and contacts. Page 2: definitions and notes on nitrate, lead and arsenic.

    Original document: Idaho Falls: 2025 drinking water report (opens in a new tab)
  2. Meridian: 2025 drinking water report

    Web page: testing schedule, chlorine row, lead and copper table, definitions and contacts.

    Original document: Meridian: 2025 drinking water report (opens in a new tab)
  3. Twin Falls: 2025 drinking water report

    Page 1: results table with the arsenic violation. Page 2: monitoring violations and contacts.

    Original document: Twin Falls: 2025 drinking water report (opens in a new tab)
  4. Idaho Department of Environmental Quality: Drinking Water Watch

    Search form: find a public water system by number, name or county.

    Original document: Idaho Department of Environmental Quality: Drinking Water Watch (opens in a new tab)
Cite or share this guide

Idaho Water. “How do I read my water-quality report?.” Research snapshot: 2026-11-06. Cite the original source for a specific figure.

https://idahowaterstatus.com/explore/water-quality-report