The ground under the Treasure Valley falls into four main kinds of material
Ready to paste into a message or email.
Copy this address: https://idahowaterstatus.com/research/claims/PILOT-CLM-010
The short answer
Sand and gravel laid down by rivers and streams supply most wells. The others are basalt, lake clays and silts, and bedrock.
The U.S. Geological Survey (USGS) sorted the valley’s underground into these four groups in a 2019 report, mainly using well-driller records. They are coarse river and stream deposits, basalt, fine-grained lake deposits, and granite and rhyolite bedrock. Each group stores and passes water differently. The fine lake deposits are the most widespread, but fewer wells reach them because they lie deeper.
These are broad groups, not four separate aquifers. USGS says the groups are layered and wedged into each other, so how easily water moves can change sharply over short distances. Lumping driller descriptions into four groups also smooths over gradual changes. USGS’s 2023 groundwater model uses six layers instead of these four groups. For your own well, the driller report, if one is on file with the Idaho Department of Water Resources, describes the layers it passes through.
Research details and original wording
Record reference: PILOT-CLM-010
Original statement
The framework represents four units: coarse-grained fluvial/alluvial deposits; Pliocene–Pleistocene and Miocene basalts; fine-grained lacustrine deposits; and granitic/rhyolitic bedrock.
- Primary geography
- Unknown
- Time period covered
- Framework published 2019, version 1.1 January 2020; mixed historical well records, no single observation date
- Metric
- Framework unit categories
- Unit
- 4 hydrogeologic units; categorical classification
- Caveat
- Historical pilot caveat: The pilot's former basement/deep/sand/coarse list did not match this source. Four framework categories are not the six numerical-model layers or four proven region-wide aquifers. P07/P21/P25 inspect full report cross-sections, interpolation and coordinate definitions before mapping or assigning wells to units. P33 access update, September 29, 2026: full PDF is available and the cited text was inspected. Earlier retrieval-only requests are superseded; scientific, version, spatial and visual limits remain. No model rerun or confidence upgrade.
- Why it matters
- Basin profiles need aquifer/hydrogeologic structure, not only groundwater-level trends.
- Verification needed
- Inspect cross-sections, interpolation and coordinate definitions before mapping units or assigning wells; categories differ from numerical model layers.
Not linked to a hypothesis yet.
Original wording is preserved below. Source attribution is not independent verification. Missing information is shown as Unknown.
- Documentary claim ID
- PILOT-CLM-010
- Original claim text
- The framework represents four units: coarse-grained fluvial/alluvial deposits; Pliocene–Pleistocene and Miocene basalts; fine-grained lacustrine deposits; and granitic/rhyolitic bedrock.
- Original source ID
- SRC-000053
- Source owner
- USGS
- Authority tier
- Tier 3 - Scientific/technical synthesis
- Claim type
- Historical hydrogeologic classification
- Original geography
- Treasure Valley and surrounding area.
- Original time period
- Framework published 2019, version 1.1 January 2020; mixed historical well records, no single observation date
- Original metric
- Framework unit categories
- Original unit
- 4 hydrogeologic units; categorical classification
- Water accounting type
- N/A; hydrogeologic framework
- Legal instrument type
- N/A; scientific framework
- Preliminary confidence
- High for metadata definitions and grid codes; spatial interpretation still preliminary.
- Original caveat
- Historical pilot caveat: The pilot's former basement/deep/sand/coarse list did not match this source. Four framework categories are not the six numerical-model layers or four proven region-wide aquifers. P07/P21/P25 inspect full report cross-sections, interpolation and coordinate definitions before mapping or assigning wells to units. P33 access update, September 29, 2026: full PDF is available and the cited text was inspected. Earlier retrieval-only requests are superseded; scientific, version, spatial and visual limits remain. No model rerun or confidence upgrade.
- Original verification needed
- Inspect cross-sections, interpolation and coordinate definitions before mapping units or assigning wells; categories differ from numerical model layers.
- Evidence for the claim
- Source record: SRC-000053; canonical URL: https://pubs.usgs.gov/publication/sir20195138. Original locator: [2026-09-26 evidence supplement](treasure_valley_model_framework_inspection.md#pilot-clm-010); report access and file/table locators are explicit there. Provenance: [Original PILOT-CLM-010](boise_payette_treasure_valley_10_source_extraction_pilot.md#pilot-clm-010), original line 200. Normalized September 29, 2026; original inspection history retained in the linked file. P33 reconciliation: Framework version 1.1, PDF p. 9 / printed p. 1, Abstract and PDF p. 20 / printed p. 12, hydrogeologic units. Report: https://pubs.usgs.gov/sir/2019/5138/sir20195138_v1.1.pdf. Full PDF retrieved September 28, 2026 in [P25 evidence pack](../14_draft_outputs/basin_source_set__Boise_Payette_Treasure_Valley.md); selected native text checked again September 29.
- Evidence against and limitations
- No independent counter-evidence established in this extraction. Inspect cross-sections, interpolation and coordinate definitions before mapping units or assigning wells; categories differ from numerical model layers.
- Related basin
- Treasure Valley aquifer system,western Snake River Plain aquifer system
- Related cross-cutting systems
- measurement,models,accounting
- Original documentary status
- Preliminary; needs verification; normalized September 29, 2026
USGS publication abstract.
preliminary_claims.jsonl#PILOT-CLM-010