See what the research says, why it matters and what still needs an answer. Each explanation includes its evidence and limits.
From a document Needs further checking
From April to October, the 1984 agreement gave Idaho Power a right to an average daily river flow of 3,900 cubic feet per second. From November to March, it was 5,600.
Read the explanation: The Swan Falls agreement’s seasonal flows came with conditions
From a document Needs further checking
Idaho Power’s rights to water above its set river flows give way to new upstream uses the state approves. Those uses can’t push the river below the set flows.
Read the explanation: Under the Swan Falls agreement, new upstream uses could outrank some Idaho Power rights
From a document Needs further checking
Three key parts had to wait for new state laws, a change to the State Water Plan and orders from regulators.
Read the explanation: Signing the Swan Falls agreement did not put every part into effect
From a document Needs further checking
Version 1.1 of the eastern Snake Plain aquifer model was retuned in May 2005 to match records from May 1980 to April 2002.
Read the explanation: An older Snake Plain aquifer model was tuned to 22 years of records
From a document Needs further checking
The model, described in a 2006 report, splits the eastern Snake River Plain aquifer into one-mile squares. It works best for broad, regional predictions.
Read the explanation: A regional aquifer model can’t pinpoint effects on one spring
From a document Needs further checking
The state planned to use the model to estimate how pumping affects rivers and springs. Its 2006 report leaves aside whether that harms senior water rights.
Read the explanation: The Snake Plain aquifer model estimates effects, not legal injury
From a document Needs further checking
A 1964 federal study put the pumping for that Snake River basin land at about 1.5 million acre-feet.
Read the explanation: In 1959, about 600,000 acres in the Snake River basin got all their irrigation water from wells
From a document Needs further checking
A 1964 federal study ranked four sources. Rain and snow on the plain gave the least, and water soaking down from irrigation gave the most.
Read the explanation: Irrigation water did the most to refill Snake River Plain aquifers
From a document Needs further checking
In the scenario, a line of 50 wells each pumped 2,250 gallons per minute (about 5 cubic feet per second) for 122 days a year.
Read the explanation: A 1964 what-if assumed none of the pumped water came back
From a document Needs further checking
The base map was slightly off in places. The shift kept those wells on the correct side of a road, railroad or stream.
Read the explanation: A 1938 well map shifted a few wells one 40-acre tract over
From a document Needs further checking
Researchers compared average monthly flow at two gauges. When flow changed during a month, they adjusted for the time water takes to travel between them.
Read the explanation: A 1938 study worked out Snake River gains and losses between gauges
From a document Needs further checking
Near the river, irrigators diverted more than 6 feet of water per acre each year. Crops used no more than 30 percent of it.
Read the explanation: Irrigation return flow supplied some Snake River water rights in the 1930s
From a document Needs further checking
The estimates drew on 107 National Weather Service stations and 16 AgriMet farm weather stations. A 2009 update raised the total to 125.
Read the explanation: The 2007 crop-water report used weather records from 123 stations
From a document Needs further checking
Actual crop water use replaced potential use, except for rainfed crops in the growing season. For irrigated crops in that season, the two are nearly the same.
Read the explanation: In 2009, a crop-water study changed its formula for irrigation need
From a document Needs further checking
Researchers worked it out from weather and a soil-water model, not by measuring fields.
Read the explanation: “Actual” crop water use in a 2007 report is modeled
From a document Needs further checking
Researchers gave agencies ideas and demo software to weigh. They called a pilot project the logical next step.
Read the explanation: A 2009 study of groundwater banking explored ideas but did not create a bank
From a document Needs further checking
Spent on industry, the credit would leave the aquifer 600 acre-feet worse off.
Read the explanation: In one example, 1,000 acre-feet of credit saved the aquifer 400
From a document Needs further checking
Stored groundwater reaches the river bit by bit. So the study tracked each credit by its future effects on the river.
Read the explanation: A 2009 study tied water-credit bookkeeping to delayed river effects
From a document Needs further checking
Each square was 3.1 miles on a side, laid out in 48 rows and 63 columns in a single layer.
Read the explanation: The 1999 Snake River Plain aquifer model used five-kilometer grid squares
From a document Needs further checking
Modelers adjusted it to match measured water levels from April 1980 through March 1981.
Read the explanation: The 1999 aquifer model was calibrated to a single year