Skip to content
Source summary

The 1999 Snake River Plain aquifer model

Ready to paste into a message or email.

Copy this address: https://idahowaterstatus.com/research/sources/SRC-000083

What this source tells us

Eastern Snake River Plain aquifer levels and spring flows rose in the first half of the 1900s. By 1999 they had been falling for several decades.

University of Idaho and Idaho Department of Water Resources (IDWR) researchers wrote this May 1999 report. It was for the U.S. Bureau of Reclamation’s Snake River Resources Review. It calls the aquifer an integral part of the basin’s water. In some places, it says, the Snake River’s flow is mostly water from the aquifer. Changes in irrigation, from both rivers and wells, drove the long rise and decline. Those changes pushed Idaho to manage groundwater and surface water together and to use a computer model of the aquifer.

The model began in the 1970s as a two-dimensional model built by the university and IDWR. This version moved it to the U.S. Geological Survey’s groundwater modeling program (MODFLOW). It also stretched the model into the northeastern part of the aquifer. IDWR tuned the original area, and the university tuned the new northeast area and the area near it. Both covered April 1980 through March 1981. After the model grew, its estimates of water entering and leaving the aquifer no longer matched. The authors called for more work, starting with how the aquifer and the Snake River exchange water.

Selected passages read · Summary checked November 6, 2026

How this summary was checked

Read the original source (opens a new tab)

Source details and citation information

Record reference: SRC-000083

Catalog title: Description of the IDWR/UI Snake River Plain Aquifer Model (SRPAM) (May 1999)

Tier 3 - Scientific/technical synthesis
Verified
PDF report
Overview
Owner
IWRRI / University of Idaho and IDWR; Donna M. Cosgrove, Gary S. Johnson, Sherry Laney and John Lindgren
Source authority
Tier 3 - Scientific/technical synthesis
Source type
PDF report
Period covered
May 1999 report; SRPAM 1.1; transient calibration April 1, 1980–March 31, 1981
Publication date
Unknown
Geography
Eastern Snake River Plain aquifer and modeled Snake River reaches
Update cadence
Static / legal / historical
Water accounting type
Modeled flow,Recharge,Discharge,Storage
Provisional status
Modeled
Caveats & use
Primary use
Historical SRPAM model structure, calibration and limitations
Known caveats
Selected text and supporting page images inspected; noisy OCR is not a reliable substitute for images. Printed/PDF offsets vary. Some earlier design rationales and calibration records were not fully documented. Historical model limitations do not describe all later versions. No executable/input review or independent model run.
Human review
Required
Claims citing this source
SRPAM 1.1 uses one unconfined layer with cells measuring five kilometers on each side, arranged in 48 rows and 63 columns. This is the grid arrangement, not a c...

SRPAM 1.1 uses one unconfined layer with cells measuring five kilometers on each side, arranged in 48 rows and 63 columns. This is the grid...

SRPAM 1.1 combines previously calibrated aquifer parameters with a localized calibration of the expanded area. Both use April 1980–March 1981, divided into 24 s...

SRPAM 1.1 combines previously calibrated aquifer parameters with a localized calibration of the expanded area. Both use April 1980–March 198...

The report says its two-dimensional model cannot represent vertical flow where vertical hydraulic gradients matter. It also identifies the one-year calibration'...

The report says its two-dimensional model cannot represent vertical flow where vertical hydraulic gradients matter. It also identifies the o...