Skip to content
Source summary

How the Wood River Valley groundwater model works

Ready to paste into a message or email.

Copy this address: https://idahowaterstatus.com/research/sources/SRC-000096

What this source tells us

The Big Wood River and Silver Creek are both the biggest source and the biggest outlet for Wood River Valley groundwater.

The U.S. Geological Survey and the Idaho Department of Water Resources built this model to help with water-rights administration and planning. It covers the Wood River Valley aquifer in Blaine County. Most people in the valley get home water from private or city wells. The model runs from 1995 to 2010 on a grid of 100-meter (328-foot) squares in three layers. It needs more than one layer because a confining unit, which holds groundwater under pressure, lies in part of the Bellevue fan. Its data, code and steps were released as an R software package so others can rebuild it.

After seepage from the Big Wood River and Silver Creek, the next-largest inflows are recharge from precipitation and irrigation, then underground flow from side valleys. Well pumping is the second-largest outflow, after groundwater seeping back into those streams. Recharge and pumping have the most effect on how much water the aquifer stores over time. Those changes also shift how much groundwater reaches the streams.

Selected passages read · Summary checked November 6, 2026

How this summary was checked

Read the original source (opens a new tab)

Source details and citation information

Record reference: SRC-000096

Catalog title: Groundwater-flow model for the Wood River Valley aquifer system, south-central Idaho

Tier 3 - Scientific/technical synthesis
Needs review
PDF report
Overview
Owner
U.S. Geological Survey / Idaho Department of Water Resources; Jason C. Fisher, James R. Bartolino, Allan H. Wylie, Jennifer Sukow and Michael McVay (Federal agency)
Source authority
Tier 3 - Scientific/technical synthesis
Source type
PDF report
Period covered
January 1995–December 2010 transient simulation plus initial steady-state period; report published June 27, 2016
Publication date
June 27, 2016
Geography
Wood River Valley aquifer system, Blaine County, south-central Idaho
Update cadence
Static / legal / historical
Water accounting type
Modeled flow,Storage,Recharge,Discharge
Provisional status
Modeled
Caveats & use
Primary use
Historical model-input baseline and reproducible temporal/spatial coverage checks
Known caveats
Main PDF/HTML inaccessible; no report-page or calibration-result verification. Selected input files do not reproduce outputs. Metadata begin date discrepancy unresolved. Only release thumbnail visually inspected. Later IDWR version 1.1 and model-development material remain distinct and uninspected. BIB-000082 seepage report/plates remain inaccessible; exact observation ingestion into this model unverified.
Human review
Required
Claims citing this source
The inspected original model has 192 monthly transient periods covering January 1995–December 2010 plus one initial zero-length steady-state period, for 193 tot...

The inspected original model has 192 monthly transient periods covering January 1995–December 2010 plus one initial zero-length steady-state...

The original model has 54,922 active cells distributed across three layers on a 100-meter horizontal grid. Layer counts are 24,242, 15,721 and 14,959. The full...

The original model has 54,922 active cells distributed across three layers on a 100-meter horizontal grid. Layer counts are 24,242, 15,721 a...